SilverStone Sugo SG05: The Mini-ITX Standard Bearer
by Dustin Sklavos on August 19, 2012 12:01 AM EST- Posted in
- SilverStone
- Mini ITX
- Cases/Cooling/PSUs
- HTPC
Testing Methodology
For testing Mini-ITX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
| Mini-ITX Test Configuration | |
| CPU |
Intel Core i3-2120 (65W TDP) |
| Motherboard | Zotac Z68ITX-A-E |
| Graphics Card |
Intel HD 2000 IGP Zotac GeForce GTS 450 Eco (dedicated) ASUS GeForce GTX 560 Ti DCII TOP (dedicated extra) |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives |
Kingston SSDNow V+ 100 64GB SSD SilverStone Slimline DVD+/-RW Drive |
| CPU Cooler | SilverStone NT07-1156 with Cooler Master ThermalFusion 400 |
| Power Supply | Included 450W 80 Plus Bronze PSU |
Each case is tested with just the Core i3's integrated graphics as well as with a discrete graphics card. The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running four threads (three with a dedicated GPU) in Prime95 (in-place large FFTs) on the CPU, and OC Scanner (maximum load) is run when the dedicated GPU is installed. At the end of fiteen minutes, thermal and acoustic results are recorded. If the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
We try to maintain an ambient testing temperature of between 22C and 24C. Non-thermal test results aren't going to be directly comparable to the finest decimal point, but should be roughly comparable and give a broader idea of how the enclosure performs.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i3-2120.
- Thank you to Zotac for providing us with the Z68ITX-A-E motherboard and GeForce GTS 450 Eco.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- And thank you to SilverStone for providing us with the NT07-1156 heatsink/fan combo.
Facebook
Twitter
RSS
70 Comments
View All Comments
Grok42 - Sunday, August 19, 2012 - link
I'm building a new mITX system this month to be my primary workstation/game rig. So far this case seems to be my case despite it not having very well ventilated drive bays. Anyone have alternate suggestions?Intel core i7-3770
Nvidia GTX 660ti
16GB RAM
128GB 2.5" SSD
No Optical
No 3.5" hard drive
DarkStryke - Sunday, August 19, 2012 - link
Go with the Asus P8Z77-I DELUXE, and that system will be a monster.Grok42 - Monday, August 20, 2012 - link
Thanks for the feedback, this is for sure the board I'm going with. It's amazing how much they can get on these tiny mITX boards these days.Japanesus - Sunday, August 19, 2012 - link
For those willing to spend more (~$200) I'd recommend the SG08 . Although slightly taller and about 2 inches deeper, the extra room allows for a more efficient design I think.Some differences:
- HD tray accommodates two 2.5" drives underneath and has silicone grommets to reduce vibration from the 3.5".
- 600W bronze rated PSU
-180mm Air Penetrator fan (which you can easily replace - I went for a Corsair H80 and replaced the noisy stock fans with one 38mm thick intake fan).
-Nice looking brushed aluminum front panel.
Easily got a mild 4.2GHz overclock on an i5-3750k with the H80's fan controller on low speed. Can always ramp things up if you don't mind a bit more noise.
Anyways it was my first build and came together effortlessly. I gave it to my dad to replace his 10+ year old crappy Gateway... It's not cheap but neither are the components you would put in a case like this, so I think it's worth it.
daar - Monday, August 20, 2012 - link
Having looked at both, from my recollection the depth of the SG08 is about the same as a regular PC tower, and a 5" difference from the SG05 (if it is the one I'm thinking of).Perhaps not an issue for some, but that difference was for me as I was sticking it inside a drawer. Otherwise, I'd just stick with the Prodigy or a mini tower for flexibility. Even if it's for home entertainment, TV stands generally space for a DVD player, and you can get a horizontal tower to fit in those.
pdjblum - Sunday, August 19, 2012 - link
I must be in the minority, because no one else seems to mind that the material of the cases reviewed are not stated up front in the specification box. I am a snob when it comes to cases, and the first thing I want to know is if it is made from aluminum or not.Dustin Sklavos - Sunday, August 19, 2012 - link
It isn't, but in my experience aluminum isn't necessarily desirable or even appropriate for the design. The SG05 uses plastic for the front fascia and steel for the chassis, and while a brushed aluminum fascia might be more attractive, the SECC steel is exactly the right call for the chassis itself.Keep in mind that the aluminum someone like Lian Li or Cubitek uses is also going to be different than the aluminum SilverStone uses.
MadAd - Sunday, August 19, 2012 - link
With all the recent buzz about SFF/ITX and the inevitability that PCs must shrink or die It would be great if we had a dedicated SFF forum here at Anandtech.Currently all SFF talk is drowned out by laptop and gaming posts, im sure there would be better discussion in its own home, currently the sheer volume of laptop posts deters anyone from even trying to discuss SFF, it feels pointless posting discussion if its just going to disappear.
Fantastic review otherwise, really enjoying the series, im determined that my current ATX builds (x3) will be my last and anything i need going forwards can be done on either SFF graphics free, or a uATX for a main gaming box with several hdd.
Samus - Monday, August 20, 2012 - link
@ the GTX560 in that thing. Ridiculous...ly cool.miahallen - Monday, August 20, 2012 - link
http://forums.anandtech.com/showthread.php?t=22055...nuff said 8)