Intel's NUCs have managed to develop a strong market for ultra-compact form-factor (UCFF) machines since they were introduced in the early 2010s. Each CPU generation has seen Intel put out stronger versions of the NUC (both in terms of performance and features) in a regular cadence. In parallel, we have seen experiments with slightly larger form-factors (such as the Skull Canyon and Hades Canyon NUCs). Currently, Intel has NUC platforms targeting three different market segments - the entry-level, mid-range, and enthusiast. While the entry level is served by Atom-class SoCs and the enthusiast category by H-/G-series CPUs, the mid-range is served by the U-series SiPs (system in package) that use the Core microarchitecture. Today, we are looking at Intel's latest flagship in the mid-range segment - the Core i7-based Bean Canyon (NUC8i7BEH).

Introduction and Platform Analysis

The Intel NUC8i7BEH belongs to the Bean Canyon NUC family. It is based on the Coffee Lake-U series SiPs (CFL-U). The Bean Canyon NUCs build upon the capabilities of the Kaby Lake NUCs (NUC7 / Baby Canyon series). From an external I/O perspective, the Bean Canyon and Baby Canyon NUCs do not appear significantly different. However, the usage of a CFL-U SiP (CPU and PCH integrated in a single package) enables the following updates in the Bean Canyon family:

  • 28W TDP processors across all SKUs, with true quad-core / octa-thread options
  • Iris Plus Graphics 655 with 128MB eDRAM across all SKUs
  • Intel Wireless-AC 9560 with Bluetooth 5.0 WLAN module
  • USB 3.1 Gen 2 (10 Gbps) support on all external Type-A ports

The TDP upgrade (15W to 28W) makes it necessary for Intel to supply a 90W power adapter with the Bean Canyon NUCs (compared to the 65W ones supplied with the Baby Canyon models).

The NUC8i7BEH that we are looking at today comes with a Core i7-8559U processor. The 'H' in the model indicates a tall kit with support for the installation of a 2.5" SATA drive. The kit is available barebones, and users need to install either a SATA or a M.2 2280 / 2260 / 2242 NVMe drive and appropriate DDR4 SO-DIMMs. We utilized a Western Digital Black NVMe SSD and two G.Skill DDR4-3000 SODIMMs to complete our build.

The specifications of our Intel NUC8i7BEH (Bean Canyon) review configuration are summarized in the table below.

Intel NUC8i7BEH (Bean Canyon) Specifications
Processor Intel Core i7-8559U
Coffee Lake-U, 4C/8T, 2.7 (4.5) GHz
8MB L2, 28 W TDP
Memory G.Skill RipjawsV F4-3000C16-16GRS DDR4 SODIMM
18-18-18-43 @ 3000 MHz
2x16 GB
Graphics Intel Iris Plus Graphics 655
Disk Drive(s) Western Digital WD Black 3D NVMe SSD (2018)
(1 TB; M.2 Type 2280 PCIe 3.0 x4 NVMe; SanDisk 64L 3D TLC)
Networking Intel Dual Band Wireless-AC 9560
(2x2 802.11ac - 1733 Mbps)
Intel I219V Gigabit Ethernet controller
Audio 3.5mm Headphone Jack
Capable of 5.1/7.1 digital output with HD audio bitstreaming (HDMI)
Miscellaneous I/O Ports 1x Thunderbolt 3 Type-C
4x USB 3.1 Gen 2 Type-A
1x micro-SDXC
Operating System Retail unit is barebones, but we installed Windows 10 Enterprise x64
Pricing $503 (barebones)
$963 (as configured, no OS)
Full Specifications Intel NUC8i7BEH Specifications

The Intel NUC8i7BEH (Bean Canyon) kit comes with a quick-start guide, hardware for VESA mounting, bunch of screws for installing the storage drives, and a 90 W (19V @ 4.74A) adapter with a US power cord.

The gallery below takes us around the hardware in the unit.

Platform Analysis

The Core i7-8559U package integrates an Intel Cannon Point-LP platform controller hub (PCH). Intel's documentation describes the board layout in detail.

The distribution of the PCIe lanes from the SiP is brought out to a large extent in the above block diagram. The system report summary generated by AIDA64 provides additional insights:

  • PCI-E 3.0 x1 port #1 In Use @ x1 (Intel I219-V Gigabit Ethernet)
  • PCI-E 3.0 x4 port #5 In Use @ x4 (Intel JHL6340 Alpine Ridge Thunderbolt 3 Controller)
  • PCI-E 3.0 x4 port #9 In Use @ x4 (Western Digital Black 3D NVMe SSD)
  • PCI-E 3.0 x1 port #15 In Use @ x1 (Realtek RTS522A PCI-E Card Reader)

The integrated PCH enables four USB 3.1 Gen 2 ports that are present as Type-A ports in the front and rear of the chassis. CFL-U also supports CNVi, the new 'integrated connectivity' feature that puts the Wi-Fi and Bluetooth MAC inside the PCH. In the NUC8i7BEH, the CRF (companion RF) module completes the Wireless-AC 9560 by implementing the signal processing, RF, and analog functions. The Intel Wireless-AC 9560 is a significant upgrade over the Wireless-AC 8265 in the Kaby Lake NUCs. It comes with Wave 2 features, including support for 160 MHz channels and downlink MU-MIMO. The 2x2 WLAN module is theoretically capable of 1.73 Gbps bandwidth. It also integrates dual-mode Bluetooth 5 support.

Intel continues to use a LSPCon on board to convert the Display Port 1.2 output of the processor to a HDMI 2.0 port with HDCP 2.2. Unfortunately, stereoscopic 3D is not supported in this configuration. However, the Thunderbolt 3 USB Type-C port's display output is compliant with HDCP 2.2 also.

In the table below, we have an overview of the various systems that we are comparing the Intel NUC8i7BEH (Bean Canyon) against. Note that they may not belong to the same market segment. The relevant configuration details of the machines are provided so that readers have an understanding of why some benchmark numbers are skewed for or against the Intel NUC8i7BEH (Bean Canyon) when we come to those sections.

Comparative PC Configurations
Aspect Intel NUC8i7BEH (Bean Canyon)
CPU Intel Core i7-8559U Intel Core i7-8559U
GPU Intel Iris Plus Graphics 655 Intel Iris Plus Graphics 655
RAM G.Skill RipjawsV F4-3000C16-16GRS DDR4 SODIMM
18-18-18-43 @ 3000 MHz
2x16 GB
G.Skill RipjawsV F4-3000C16-16GRS DDR4 SODIMM
18-18-18-43 @ 3000 MHz
2x16 GB
Storage Western Digital WD Black 3D NVMe SSD (2018)
(1 TB; M.2 Type 2280 PCIe 3.0 x4 NVMe; SanDisk 64L 3D TLC)
Western Digital WD Black 3D NVMe SSD (2018)
(1 TB; M.2 Type 2280 PCIe 3.0 x4 NVMe; SanDisk 64L 3D TLC)
Wi-Fi Intel Dual Band Wireless-AC 9560
(2x2 802.11ac - 1733 Mbps)
Intel Dual Band Wireless-AC 9560
(2x2 802.11ac - 1733 Mbps)
Price (in USD, when built) $503 (barebones)
$963 (as configured)
$503 (barebones)
$963 (as configured)
BAPCo SYSmark 2018
POST A COMMENT

81 Comments

View All Comments

  • imaheadcase - Sunday, April 7, 2019 - link

    Why would you compare to a laptop. This isn't even for that market, its for Home Media/dumb computer you never look at. Reply
  • Samus - Thursday, April 4, 2019 - link

    Man this thing is a beast. It's practically the same speed as my brand new full size desktop (Core i5-9400) Reply
  • DimeCadmium - Thursday, April 4, 2019 - link

    Umm, what? There aren't currently any Atom NUCs and the Bean Canyons are half a year old. Reply
  • Pisi - Thursday, April 4, 2019 - link

    Haven't been able to find this RAM (G.Skill RipjawsV F4-3000C16-16GRS DDR4 SODIMM) anywhere. Are you sure there's no typo involved? Reply
  • eastcoast_pete - Thursday, April 4, 2019 - link

    Ganesh, thanks for including the HTPC-relevant tests and benchmarks in the review. Many (most?) NUCs end up serving as HTPCs, and that information is key for selecting the right one. Reply
  • DroidTomTom - Friday, April 5, 2019 - link

    I wish someone made one with 3 HDMI outputs and high quality analog audio (Note after 2015 even so so quality analog audio is hard to find in these, have to tie up a USB port for external audio). Only need a Core i3 and 8GB of RAM and 256GB SSD would be fine. Reply
  • fackamato - Saturday, April 6, 2019 - link

    Most people either use an AVR (audio via HDMI) or a DAC, why on earth would you want good onboard audio? Reply
  • bill44 - Saturday, April 6, 2019 - link

    “Unfortunately, stereoscopic 3D is not supported in this configuration.”
    Are there any DP 1.2 or TB3 to HDMI adapter/converter that works with FP 3D?

    Also, why not Titan Ridge controller with DP 1.4?
    Reply
  • Naxxy - Sunday, April 7, 2019 - link

    Did the 3000 mhz ram work just like that?? I have the Intel NUC8i7BEH and i first bought 16gb Ballistix Sport DDR4 @ 2666 and there was no way to boot the system...... had to switch to 2400mhz ram.....
    Talked to an Intel support and they told me that having no XMP profiles that NUC would only work with ram up to 2400.
    Reply
  • Mr0czny - Friday, April 26, 2019 - link

    Im also interested cause im going to replace desktop to this NUC 8i5 ...

    does 3200 MHz ram add some performance or advantages are negligible

    And does it works without problems like Naxxy wrote
    Reply

Log in

Don't have an account? Sign up now