A Trio of Thermaltake Towers
by Joshua Buss on August 16, 2006 2:30 AM EST- Posted in
- Cases/Cooling/PSUs
Thermaltake Eureka - Installation
We'll wrap up our look at the Eureka by stepping through some of the installation steps of our standard ATX test bed. First up was putting the power supply into place, which is easy thanks to the ample space above it. Next we mounted the motherboard to the removable tray, which had all the appropriate standoff positions clearly labeled just like all Thermaltake cases we've looked at lately.
As noted earlier, slipping the tray into place was easy as well. There were really no cable problems to speak of - there is plenty of room for even the most complicated server builds, and the very standard layout only amplifies this point.
A close-up of the expansion card clip shows how it supports the weight of our 6600GT video card. To undo the strip one has to lift on the green plastic tab at the top.
In another effort to simplify things the Eureka keeps the 5.25" rails behind each drive bay cover.
Once our install was completed we noticed how much the honeycomb grill acts like a standard case window, letting users see the contents of their computer - especially if there are extra lights inside. With this much venting on the side though, we worried that the case might not adequately cool the hard drives.
Many cases are designed to create a "wind tunnel" effect from the front of the case to the rear fans; all of the venting can negate that type of air flow, so the end result is almost like removing the side panels altogether. That may or may not cool effectively, but before temperature testing let's look at the third case in the comparison.
We'll wrap up our look at the Eureka by stepping through some of the installation steps of our standard ATX test bed. First up was putting the power supply into place, which is easy thanks to the ample space above it. Next we mounted the motherboard to the removable tray, which had all the appropriate standoff positions clearly labeled just like all Thermaltake cases we've looked at lately.
 |
| Click to enlarge |
As noted earlier, slipping the tray into place was easy as well. There were really no cable problems to speak of - there is plenty of room for even the most complicated server builds, and the very standard layout only amplifies this point.
 |
| Click to enlarge |
A close-up of the expansion card clip shows how it supports the weight of our 6600GT video card. To undo the strip one has to lift on the green plastic tab at the top.
In another effort to simplify things the Eureka keeps the 5.25" rails behind each drive bay cover.
Once our install was completed we noticed how much the honeycomb grill acts like a standard case window, letting users see the contents of their computer - especially if there are extra lights inside. With this much venting on the side though, we worried that the case might not adequately cool the hard drives.
 |
| Click to enlarge |
Many cases are designed to create a "wind tunnel" effect from the front of the case to the rear fans; all of the venting can negate that type of air flow, so the end result is almost like removing the side panels altogether. That may or may not cool effectively, but before temperature testing let's look at the third case in the comparison.
Facebook
Twitter
RSS
43 Comments
View All Comments
Griswold - Thursday, August 17, 2006 - link
The first one looks like some vertical hi-fi deck with a side window - and I hate side windows.Yuck indeed.
seven9sn10s - Thursday, August 17, 2006 - link
The Aguila has a measurement of 27dB(12" above) and subjective rating of 2/10.In a previous review, the Raidmax X1 & Antec P150 both a measurement of 45dB(12" above) & subjective rating of 2/10 & 2.5/10 respectively. The subject ratings to dB measurements do not seem to be on a consistent scale. Am I to believe that the Aguila is so much quieter than the Raidmax X1 or Antec P150?? Please clear this up. Thanks.
seven9sn10s - Friday, August 18, 2006 - link
Hello???Somebody please answer.. is this Aguila case far quieter than the Antec P150/Solo? Tryin to build a system here. Thanks.
poopoohead - Sunday, August 20, 2006 - link
yeah, me too! the measurement seems so low compared to any other case they have ever tested, even the Zalman HTPC that they said was very quiet? why does the article not make special mention of the aguila super quietness?Gholam - Thursday, August 17, 2006 - link
HEC 6A rebadge, Chieftec DX rebadge... pay once for the case, and twice more for a TT sticker. No thanks.Missing Ghost - Wednesday, August 16, 2006 - link
The Aguila with no window does not exist?! I thinkstthiel - Wednesday, August 16, 2006 - link
"There's a law on AnandTech case reviews: no matter what they might review, a bunch of people have to show up and grouse about how the cases look like crap, or they're nice looking but too expensive, or some other opinion followed by the statement that "no one would ever buy these...."So what your saying is people have different opinions...thats very insightful.
teng029 - Wednesday, August 16, 2006 - link
i like this case, although removable motherboard trays should be standard on cases these days.tthiel - Wednesday, August 16, 2006 - link
Those are some seriously ugly cases.eastvillager - Wednesday, August 16, 2006 - link
All bling, no zing.