Antec Overture II (cont’d)
Taking a couple screws off the back of the top cover is all one needs to do to free the steel lid of the Overture II. Sliding it backwards and opening up the case reveals a more compartmentalized design than the Mstation, with much more capacity for additional drives.
Click to enlarge.
With the three removable drive cages taken out, the interior layout of the Overture II can be seen. The power supply is in pretty much the same place as it was in the HT-1100 case, but instead of extra space on the left for a specialized cooling duct, the Overture puts the extra space to use allowing for two additional hard drives and two exhaust blower fans - one of which remains hidden under the hard drive supports.
Click to enlarge.
Here, we see the 5¼“ drive cage with our SATA DVD combo drive installed. The cage is well made, with strong, tool-less latches on the top and bottom, but doesn’t allow for any adjustments in terms of drive positioning.
Click to enlarge.
The internal 3½” drive cage features rubber grommets for silent drive operation and is held in place by rails on the bottom and two case screws on top.
Last, but not least, is the external 3½” cage, also with support for two drives. It’s a definite feather-in-the-cap for the Overture II that with a 3½” floppy/multi-format flash-card reader drive installed, the case still has room for three hard drives, especially considering that HTPCs (in general) can benefit greatly from massive storage banks for video and music files.
Here, a close-up of the hard drive cage support gives us a better idea of how the Overture will help to keep the hard drives cool. Note the second blower barely visible in this picture; it’s oriented the same way as the one to its right.
In context with the main rear 80mm exhaust fan, it looks like the Overture II will have significantly better cooling than the Mstation, especially for any hard drives mounted in the rear cage. It’s time to install the test bed to see if it delivers!
Click to enlarge.
Facebook
Twitter
RSS
26 Comments
View All Comments
BigandSlimey - Tuesday, November 22, 2005 - link
These guys http://www.atechfabrication.com/products/HTPC_case...">http://www.atechfabrication.com/products/HTPC_case... have been designing their cases in conjunction with the HTPC guru's at avsforum. I'd suggest anyone planning to build a HTPC to go to http://www.avsforum.com/avs-vb/forumdisplay.php?f=...">http://www.avsforum.com/avs-vb/forumdisplay.php?f=... and do some reading, there's a lot to consider.I'm also surprised at your omission of the Ahanix cases http://www.ahanix.com/ahanix_product_list.asp?cid=...">http://www.ahanix.com/ahanix_product_list.asp?cid=... which IMO look a lot better than any of the options on your article.
See also: http://www.origenae.com/products_htpc.htm">http://www.origenae.com/products_htpc.htm
http://www.silverstonetek.com/product-case.htm">http://www.silverstonetek.com/product-case.htm
ceefka - Tuesday, November 22, 2005 - link
Those Origenae look very nice. I meant the X15 in my earlier comment. This one will cost around 500 bucks. Expensive, but very pretty.lukecon - Tuesday, November 22, 2005 - link
All well and good on the review love AnandTech's review but I think you guys forgot something - The TV tuner in your system - I mean it is a Home Theater PC.Tamale - Tuesday, November 22, 2005 - link
The tuner shouldn't really pose any additional problems with a particular case, and the 6600GT we use gets as hot or even hotter than most video cards with built-in tuners.Perhaps the cooling in an HTPC would be changed dramatically though if another expansion card is also in the system.. hmm.. I'll have to think about that one. Thanks for the comment.
BigLan - Tuesday, November 22, 2005 - link
Actually, tuners can get pretty toasty, maybe not as hot as a video card, but they don't have active cooling on them. An MCE-500 dual tuner stuck in the last slot with no airflow could be a problem.If you are adding a soundcard as well, it can also impede airflow which exacerbates the problem.
tkr2099 - Tuesday, November 22, 2005 - link
Very nice review! I'm planning on building a HTPC this holiday season, so this review could not have come at a better time. Thank you, Anandtech, for another extremely well written and helpful review!tayhimself - Tuesday, November 22, 2005 - link
IMO Silverstone especially and less so Ahanix are specialized HTPC vendors. Either you didnt know this, didnt bother to do research, or didnt get a free sample from them. None of which is a terribly good thing.AFAIK no 3R systems cases have been available in North America since about 3 years ago when newegg carried a few. Theyre a Korean manufacturer of quality cases that are quite popular in Australia (I'm in Canada FYI).
Also, why the POS power supply along with the lousy thermaltake heatsink with a hot P4 system? Not too many people are building HTPCs with P4s, and they tend to use better components than Mad Dog and ThermalTake (no offense to the *bling* obsessed).
The measurements dont jive with the subjective measurements as a 9 dB difference between the loudest and quietest is almost twice as loud.
A poor review, that doesnt belong on AT. I could probably write a better review and I've never done one before.
MPE - Tuesday, November 22, 2005 - link
I could probably write a better review and I've never done one before.Cop out - not to mention inconsequential, immature, ad hominem, and probably false.
tayhimself - Tuesday, November 22, 2005 - link
ad hominem? Go to http://dictionary.com">dictionary.comceefka - Tuesday, November 22, 2005 - link
Isn't that just perfect? If you can get these temperature numbers with P4, you know that a 90nm s939 is going to do just fine.There are so many cases to chose from. Even with built in LCD screens (not cheap btw). Maybe AT can inlcude HTPC's in their entry/mid-range/high-end reviews and builds. On the other hand, this could be a totally different category by itself. You'd also have the opportunity to chose platform.
This brings forth the next question: How long before Apple makes a Home-Pod, HTPC based on Mac ingrediënts. They should be able to make/develop one by now.