Motherboard Tray
The motherboard tray is almost identical to that in the PC-6070 as well as many other models similar to the PC-60 Plus in that the tray and back panel of the case are a single piece. It can be removed by pulling it out through the back of the case. It is secured to the PC-60 Plus by four thumbscrews on the back panel and can also be locked to the case as we mentioned before.
Unlike the PC-6070, however, the PC-60 Plus’ tray uses screw-on stand-offs instead of the snap-on type. By “snap-on”, we mean that the stand-offs can be installed on the tray by clipping them into the rectangular slots cut out on the tray. We actually feel that it is better to have the screw-on stand-offs because they just seem more stable than the snap-on type.
Facebook
Twitter
RSS
43 Comments
View All Comments
val - Sunday, February 27, 2005 - link
btw: when there is CM Stacker case, no other cases are neccessary. Specialy not such acoustic resonators like Lian Lival - Sunday, February 27, 2005 - link
#20Its like in Mockba, you know nothing, but They know everything...
Avalon - Sunday, February 27, 2005 - link
In Soviet Russia, the computer installs YOU!phaxmohdem - Sunday, February 27, 2005 - link
Can somebody explain to me WTF this "In mother Russia" BS is about?? IS it supposed to be funny?ProviaFan - Saturday, February 26, 2005 - link
Well, in that case, cHodAXUK, I can understand your feelings, even though I am almost entirely satisfied with my PC60. I might get the Mac-like case (the V???? series) if I ever get the dual Opteron board I want - the kind that is EATX and won't fit in an ATX case. ;-)For style, subtle works best for me - the wave case by Cooler Master is kind of cool IMHO. :)
natethegreat - Saturday, February 26, 2005 - link
I can't believe nobody has pointed out that this new case by Lian Li is louder than a TT Tsunami!TheInvincibleMustard - Saturday, February 26, 2005 - link
That duct is a nice idea, but how well does it work with different styled motherboards, eg DFI's new nForce4 line?I'm also curious where the intended airflow diagram went (page 4).
You also mention that you were worried about the PSU installation with regards to the top blowhole fan, but never mentioned if it actually turned out to be a problem or not ... did it work fine?
cryptonomicon - Saturday, February 26, 2005 - link
i like the plain case, lian li cases are fun to mod, its easy to chew through the aluminum and widen the fan intakes, ect. the main problem with the PC-60/61 was the front intake. the air hole were too small, and then there was a filter after that. i cut out the entire fan grille, and thew away the filter. so i'm glad this new case has better airflow through the front. i'm not sure if i care for the duct, or the GPU fan. i always window-mod the case, but if you don't have a window mod, i see how this is useful.and as for the sound levels.. doesn't everyone replace their fans with nice ones anyways? if you dont have $10 i understand though.
val - Saturday, February 26, 2005 - link
will never do the mistake to buy Lian Li case again.For that money, in Soviet Russia, You have nice car, and 100l of Vodka.
val - Saturday, February 26, 2005 - link
on photo it may look nice, but in real it is resonating, buttons leaving the holdings and so on :-/.