Intel Xeon 3.6 2MB vs AMD Opteron 252 Database Test
by Jason Clark & Ross Whitehead on February 14, 2005 8:00 AM EST- Posted in
- IT Computing
SQL Stress Results
The SQL Stress results have changed somewhat from some of our earlier articles using this tool. We did a revamp of the tool itself, which is more performant on high volume queries. Also, we lengthened the test time to 20 minutes and changed the queries around some to reflect our current FuseTalk version. The new 2MB L2 Xeon part did quite well here, churning out a 7% gain over its 1MB counterpart. The Opteron 252 gained its usual 7% for its clock increase of 200MHz. There was no gain from the 1GHz HT link support as we discussed in our Test Hardware configuration on Page 2. Overall, the new Xeon 2MB part was the "hands down" winner for this test with a 13% lead over the Opteron 252, thanks to its 1MB cache boost.
Total queries executed
The number of queries that were executed throughout the duration of the test.
Queries per second
An average of how many queries per second were executed throughout the duration of the test.
Facebook
Twitter
RSS
97 Comments
View All Comments
Carfax - Tuesday, February 15, 2005 - link
Sheesh, the workstation benches still aren't up? :(More people are interested in the workstation benchmarks than database I'd wager because it's a better showcase for the new enhancements.
How long will we have to wait?
Jason Clark - Tuesday, February 15, 2005 - link
snorre, proper? It is proper in terms of the Windows world since 64 bit DOES NOT EXIST :). If you want to see 64bit linux coverage as said in these comments and in the article view the linux section or Johans work in the IT section.snorre - Tuesday, February 15, 2005 - link
I'd like to see a proper Xeon DP 2M vs Opteron 252 review, since MS SQL 32-bit benchmarks are only of limited interest. When will we see this?Are there any proper Opteron 252 reviews out there?
semo - Tuesday, February 15, 2005 - link
#70, you said it. it's the cost. cost is my killer.sure ddr2 costs more than ddr but i hate upgrading my whole setup just to get new momory. right now i'm running a pc133 setup and cannot upgrade even if i wanted to (and believe me... i want to). i know that low latency is what the hammer architecture wants but doesn't regitered memory increase latencies... and what is registered memory anyway?
Jason Clark - Tuesday, February 15, 2005 - link
There was a few questions about single or dual in here, I had answered that but to clarify all testing was DUAL processor.Jason Clark - Tuesday, February 15, 2005 - link
One thing to remember with the Tyan bios is it is pre-production. We'll post info as soon as we have it.Jason Clark - Tuesday, February 15, 2005 - link
We're working with Tyan on the 1GHz HT issue, if we get a new bios that supports it we will re-test and post our results..Cheers.
Viditor - Tuesday, February 15, 2005 - link
"i'm interested in number cruncing and games and rendering, i.e. a workstation not a server"Why would you not want registered memory then? Contrary to popular opinion, it does not affect the speed...only the cost.
For gaming, dual systems are no help at all (unless you're running a game server) with todays software. For professional rendering, you absolutely WANT registered memory!
DDR2 would actually be no speed increase at all for AMD64 systems, and none yet for Intel systems. Not until the memory speeds get much higher will we see any benefit from DDR2...
XDR is also not a good match for the AMD chips because of the high latency. AMD chips are NOT bandwidth constrained but ARE latency sensitive (meaning that increasing memory speeds does very little, while increasing latency makes them much worse).
The only real issue of registered memory is the cost, and if that is the problem I would suggest a high end A64 939 SLI board (e.g. Asus A8N-SLI), and upgrade to dual core in September or so...
semo - Tuesday, February 15, 2005 - link
i'm interested in number cruncing and games and rendering, i.e. a workstation not a server. unforutnately the integrated memory controller of the amd hammers are both their strengths and weaknesses.it's only upto amd whether we can have unregistered, ddr2 or maybe even xdr memory i guess
Viditor - Tuesday, February 15, 2005 - link
"is it possible to have a dual proc setup without using registered memory?"Technically yes...but registered memory is what's preferred for servers because it is more securely accurate. All Opterons use registered memory...
Platforms for the Athlon MP use non-registered memory, and a very few of the Xeon platforms do as well...