Value Case Roundup: A Look at the Affordable
by Purav Sanghani on February 1, 2005 12:35 AM EST- Posted in
- Cases/Cooling/PSUs
AsiaPro 8654BL
Like Linkworld Electronics Co., AsiaPro also takes reference cases and gives it that AsiaPro touch.
External Design
The bezel of the 8654BL is what will attract spectators. On either side of the bezel, there are two clear tubes that extend from top to bottom. Each looks like it has thousands of tiny bubbles in it, but they are really fibers that emit light when the system is turned on. It cycles through various colors and gives the bezel a flashy, yet not overdone look.
The rest of the bezel is silver in color. There are four 5-1/4"; drive bays, the top one taken by an included optical drive bezel, which has the phrase "Digital Multimedia Computer System"; printed in black on it. There are also two 3-1/2"; drive bays under those.
At the bottom, we see the power and reset buttons with the power and HDD activity LEDs between the buttons in the same vertical placement as the 268WSP. This whole scene is framed by a molded inset border.
Under the buttons and LEDs, we see a fold-up door that hides the auxiliary ports. This time, the door easily swivels up and inside the case to avoid accidental breakage unlike the 268WSP and 3131G. The ports, though, are limited to dual USB ports with optional punch out openings for audio and FireWire as on the 268WSP.
The side panels feature a pressed-in globe logo as well as ventilation holes at the front corners. To remove these, we need to remove two screws and pull the panels back.
Internal Design
The internal structure, like the 268WSP, is made of 0.7mm steel, which proves to be slightly stronger than the steel used in the 3131G, but the quality of this steel was not as high as that used in the 268WSP. We will see later, however, that the steel still may not be as strong as it should be to hold certain parts of our test bed.
We begin at the front where we see the four 5-1/4" drive bays. Each has a platform on which to rest the drives as well as two sets of four holes and two sets of long cut-outs to help mount drives.
The lower bays are of the 3-1/2" type and are plentiful at 6 for HDD and 2 more at the top for floppy drives.
The motherboard tray, like the 3131G, features raised stand-offs at the main motherboard contact points as well as many other holes to install standard stand-offs for a wider range of boards. AsiaPro also includes insulators similar to those that come with the 3131G for those raised stand-offs that will not be used.
The expansion slots also feature something interesting. The bottom four slot covers have holes for ventilation and the option to mount an 80mm fan there. We'll talk more about cooling a bit later.
As we move up to the back plate of the motherboard, we notice some bending of the steel in that area. It seems as though the included power supply is much too heavy for this steel to hold up. We are afraid that our bigger and heavier OCZ PowerStream may certainly take the bent steel to another level.
Facebook
Twitter
RSS
58 Comments
View All Comments
DAPUNISHER - Tuesday, February 1, 2005 - link
http://www.newegg.com/app/ViewProductDesc.asp?desc...Has side and top fans included and goes for $31. Also has room for 1 intake and 2 exhaust and good conservative styling.
DaveA - Tuesday, February 1, 2005 - link
oh and the athenatech a602 goes for $48.50 on newegg. i recommend it over any of the cases reviewed here.DaveA - Tuesday, February 1, 2005 - link
how come you didnt include the athenatech a602? you recommended it in your recent budget guide. it has 120mm fan slots in the front and rear of the case, a 92mm cpu duct on the side of the case which can take a 92mm fan. it has 2 usb 2.0 ports on the front along with microphone and speaker ports. its almost completely tooless as well. has a removable hard drive cage and no sharp edges.Spacecomber - Tuesday, February 1, 2005 - link
I don't think that I can see making use of any but a couple of these cases reviewed, even for an inexpensive system. I mean there's inexpensive and then there's cheap, and most of these cases exude cheapness. For instance, I can't believe that a few drilled out holes in sheet metal can provide a proper fan vent; it looks more like what you would use for straining your spaghetti noodles.I guess that I'm also not of the school that screwless is better. I mean operating a screwdriver is pretty simple; often more so than trying to figure out how all the various clips and latches are suppose to work. I usually end up feeling like a system that uses screws, instead of these various clips, is really assembled and not just hung together.
So far, I haven't found a case and power supply (bought seperately or together) that is as good as and less expensive than the Antec 1650, which is my choice for entry level and basic systems. $55 for a case that includes 120mm fan, Antec SL-350 power supply, and side CPU air guide.
Antec just needs to start upgrading their power supplies to more models with 24 pin main power cables and 6 pin PCI-E video card connectors, but I'm talking about their cases and power supplies aimed at higher end systems, now.
Anyway, that's just my 2 cents worth. I always enjoy looking at any review that tries to focus on practical hardware such as this review does.
Space
sdfg - Tuesday, February 1, 2005 - link
Actually, the Chenming case looks very similar to the Antec Lanboy, only steel and sans power supply.LoneWolf15 - Tuesday, February 1, 2005 - link
The power supplies of these review units are horrible, and do not in any way represent good additional value, IMO. Every enthusiast forum I know of rates RaidMax and Powmax PSU's as utter crap. I noticed that at least one of them only delivered 12 amps on the 12v rail, not even close to what Barton core Athlon XP systems need for reasonable stability. I'm not sure I even trust the ratings on the stickers though, as cheap power supplies tend to list overly optimistic specs.For not much more than this, you can buy an Antec SX630II or SX635II case that may not be flashy, but is built more solidly, won't cut you, and has an Antec power supply. If you're serious about making a good system though, buy your power supply separately from the case. With cases, you really do get what you pay for, and the Chenming was the only case I saw in this review that I didn't think was crap.
MrEMan - Tuesday, February 1, 2005 - link
What is it these days with all the cases being mini/mid/full size towers? Unless you put the tower under the desk, it takes up more desktop real estate than putting the monitor on top of a desktop case (which also raises the monitor to eye level, which is preferred, unless the user has bi-focals).I don't want a tower and I don't want an XPC.
I want a standard desktop case with multiple bay options which can hold either a 19" monitor or a flat panel (neither of which an XPC will do apart from a balancing act).
Besides, since heat rises, vertical orientated expansion slots are better than the heat accumulating horizontal orientated slots in all tower cases.
avijay - Tuesday, February 1, 2005 - link
Good review. Its sad to note though for cases with a PSU, the PSU doesn't get much coverage despite requests everytime a case review is published. No indication of the reliability of the PSU that comes along with the case. Usually everyone who goes looking for a case would like to buy one with a PSU if available and it would be good to know the pros and cons of PSUs and also how they perform. Everyone knows a good PSU is as important for a stable system as any of the components. I'd really like to see how these PSUs (and for that matter some of the other well known PSUs) perform when put to the test.Possible to do a PSU roundup? If PSUs cant be covered in case reviews, please cover them separately.
Dranzerk - Tuesday, February 1, 2005 - link
I would rather buy one of these than all the stupid expensive voltron looking "gamer" cases on the market. I saw a case that looked like someone puked up crayons they ate all over it..it was $90! lolNice article.
eetnoyer - Tuesday, February 1, 2005 - link
Still waiting on the "affordable" memory review.