Value Case Roundup: A Look at the Affordable
by Purav Sanghani on February 1, 2005 12:35 AM EST- Posted in
- Cases/Cooling/PSUs
Linkworld 3131G (cont'd)
We have seen the external and internal designs of the 3131G, but how does the entire structure hold up during typical uses of this case?
Construction
The 3131G is made of much thinner steel than in the 268WSP. It's the type of steel that we used to see in older PC cases back in the early 90s, which cut our hands at every opportunity. The 3131G has this same issue with sharp edges. Though the manufacturer has tried to fold over the edges of the steel, there are many areas still unprotected.
Cooling
The 3131G came with a single 80mm fan, which is mounted at the back of the case under the included power supply. The only other area to mount an 80mm fan is at the front of the case. The 3131G may have a hard time competing with the 268WSP's options to mount up to seven 80mm fans.
The 3131G also comes with a 300W P4 power supply. It may not be the best unit, but for the price of the case, it is quite a value.
Installation
As with the 268WSP, there were no special tool-less features that could reduce the total time to install our test bed. In fact, we spent a few more minutes to install the plastic stand-offs, since our motherboard needed a bit more support than readily offered in the 3131G.
We also found it annoying to have to hold a HDD while trying to screw it into the drive bays. Those platforms would have helped reduce tension from this tedious task.
The motherboard connectors for the USB ports were even worse than those of the 268WSP. Though they were labeled, it would have been better to include standardized connectors to reduce installation time
Facebook
Twitter
RSS
58 Comments
View All Comments
KristopherKubicki - Tuesday, February 1, 2005 - link
sdfg: I think you mean the Antec Lanboy looks like the Chenming cases...Kristopher
aeternitas - Tuesday, February 1, 2005 - link
Yes #24, we are all spoiled. Spoiled with _quality_. Some of us like to have nice things. I for one dont want to see cheap plastic houseing my loveingly put together equiptment. This is a hobby for most, and with a hobby means quality is the standard.If you are just building PCs for people that dont care, then by all means, but this isnt really a site for people that dont care.
sprockkets - Tuesday, February 1, 2005 - link
Err, no In-Win cases?miketheidiot - Tuesday, February 1, 2005 - link
these cases are all trash. Drop the extra $20 and get a decent antec PSU/case combo.And why wasn't the Sonata or something lke that included?
Cygni - Tuesday, February 1, 2005 - link
God you guys are ridiculous! I personally use Antec cases for my own personal builds, but when building for my business, i use the cheapest non-ugly case I can find. Of course, PSU is a concern, but im not slapping FX's in with a 250wt. PSU does change reliability, this is fact, but it is FAR overhyped. Bad RAM can make 10 times the impact.Honestly, who gives a crap if the case isnt amazing? Its a CASE! As long as its not ugly, and as long as its fairly well put together (almost all of them are these days), who cares? 99% of the people i build computers for never open the case, so who cares if it has sharp edges? I dont know. You guys all sound really really spoiled, haha. I personally thought alot of the cases reviewed are FAR less ugly then so called "Gamer cases" that are out there with friggen dragons with LED eyes that readout useless voltage information...
MarkM - Tuesday, February 1, 2005 - link
I'm with #4 too -- a the point you are getting this level case, you are probably looking at a no-frills basic PC with cheaper components, at which point it doesn't make much sense for you to be building anyway, you should just get a Dell & get that conveniecne/security of waranty.Not to mention if you are building so basic a PC, you probably are not reading anandtech :)
Anywya, I'm not sure I see great value. I got my Sonata with the 350w quiet PSU for $70 total AR, some of these cases would cost about as much with even an inferior PSU. So why bother at all?
digit - Tuesday, February 1, 2005 - link
ive got that raidmax (windowless version) and i really like it. it came with the 4 fans already installed in front and its definitely the coolest running case ive ever had. recently ive started having problems with power stability from the psu, but it worked just fine for over a year.fatdog6 - Tuesday, February 1, 2005 - link
Im pretty dissapointed with this review,first off of the 150 or so systems that i have built my first consideration is reliablity/stability expecially in a budget build. I I can i imagine getting a call and then seeing the power supply fell down knocked the cpu off into the gpu trashing the memory on the way.!!
As stated by Spacecomber #15
"So far, I haven't found a case and power supply (bought seperately or together) that is as good as and less expensive than the Antec 1650, which is my choice for entry level and basic systems. $55 for a case that includes 120mm fan, Antec SL-350 power supply, and side CPU air guide."
As stated by Lonewolf #13
"The power supplies of these review units are horrible, and do not in any way represent good additional value"
DaveA - Tuesday, February 1, 2005 - link
http://images.anandtech.com/reviews/cases/roundups...yeah whats up with that?
Desslok - Tuesday, February 1, 2005 - link
In the review for the Codegen 6209 is the motherboard tilted in the install pic??