Value Case Roundup: A Look at the Affordable
by Purav Sanghani on February 1, 2005 12:35 AM EST- Posted in
- Cases/Cooling/PSUs
AsiaPro 8654BL
Like Linkworld Electronics Co., AsiaPro also takes reference cases and gives it that AsiaPro touch.
External Design
The bezel of the 8654BL is what will attract spectators. On either side of the bezel, there are two clear tubes that extend from top to bottom. Each looks like it has thousands of tiny bubbles in it, but they are really fibers that emit light when the system is turned on. It cycles through various colors and gives the bezel a flashy, yet not overdone look.
The rest of the bezel is silver in color. There are four 5-1/4"; drive bays, the top one taken by an included optical drive bezel, which has the phrase "Digital Multimedia Computer System"; printed in black on it. There are also two 3-1/2"; drive bays under those.
At the bottom, we see the power and reset buttons with the power and HDD activity LEDs between the buttons in the same vertical placement as the 268WSP. This whole scene is framed by a molded inset border.
Under the buttons and LEDs, we see a fold-up door that hides the auxiliary ports. This time, the door easily swivels up and inside the case to avoid accidental breakage unlike the 268WSP and 3131G. The ports, though, are limited to dual USB ports with optional punch out openings for audio and FireWire as on the 268WSP.
The side panels feature a pressed-in globe logo as well as ventilation holes at the front corners. To remove these, we need to remove two screws and pull the panels back.
Internal Design
The internal structure, like the 268WSP, is made of 0.7mm steel, which proves to be slightly stronger than the steel used in the 3131G, but the quality of this steel was not as high as that used in the 268WSP. We will see later, however, that the steel still may not be as strong as it should be to hold certain parts of our test bed.
We begin at the front where we see the four 5-1/4" drive bays. Each has a platform on which to rest the drives as well as two sets of four holes and two sets of long cut-outs to help mount drives.
The lower bays are of the 3-1/2" type and are plentiful at 6 for HDD and 2 more at the top for floppy drives.
The motherboard tray, like the 3131G, features raised stand-offs at the main motherboard contact points as well as many other holes to install standard stand-offs for a wider range of boards. AsiaPro also includes insulators similar to those that come with the 3131G for those raised stand-offs that will not be used.
The expansion slots also feature something interesting. The bottom four slot covers have holes for ventilation and the option to mount an 80mm fan there. We'll talk more about cooling a bit later.
As we move up to the back plate of the motherboard, we notice some bending of the steel in that area. It seems as though the included power supply is much too heavy for this steel to hold up. We are afraid that our bigger and heavier OCZ PowerStream may certainly take the bent steel to another level.
Facebook
Twitter
RSS
58 Comments
View All Comments
johnsonx - Tuesday, February 1, 2005 - link
First, thank you for this article. Yes, for our own personal rigs a nicer case is best, but many of us build relatively generic office computers as part of our jobs. Mostly I build Micro-ATX boxes using the InWin L545 micro-tower chassis, and some with the newer InWin BT-series desktop/tower convertable, but I do often need to build something more full sized.My request, like one or more others said:
Please, at least a few words about the power supply included with each case.
If I have to buy a $25 case and then add a $40 power supply, I might as well have just bought one of the low-end Antec cases for $60 that includes an Antec 350 watt power supply. At least then I know I've got a good power supply. Sure, most of the Antec cases aren't exactly attractive, but they don't offend either.
Also, it might be nice if your features table also listed the steel thickness of each case. Nothing says cheap like flimsy steel.
LX - Tuesday, February 1, 2005 - link
My info is a bit outdated.The last case+PSU that appealed to me was the Sonata.
Is there something better (quieter, cooler, better PSU, whatever) now at the same price range?
Thanks.
tokath - Tuesday, February 1, 2005 - link
Some of those cases ie the linkworld have horrible power supplies in them. A company I used to work for sold them, we had a ton of them back and most of those systems were low level athlon and celeron systems. Heh even with raidmax and powmax we didnt have as huge of a failure rate and thats not saying much :)Pollock - Tuesday, February 1, 2005 - link
I hear you, #9. However, at this point, I think it's safe to say that article has been canned.Glassmaster - Tuesday, February 1, 2005 - link
#11, 13: Every single one of those PSUs included in those cases in on my list of PSUs you shouldn't use (for an Athlon 64 system, don't know about any other platforms). I have compiled the list based on PSUs that I have seen found to be underpowerd/unreliable during 6 months of troubleshooting Athlon 64 systems in the offical AMD forums. A PSU was included if replacing the PSU solved the POSTing/Booting/Stability issues, or if the PSU was clearly overrated. I would not trust even $500 of hardware to any of these PSUs.The article should come with a disclaimer warning not to use any of these PSUs in a Athlon 64 and also probably a P4 or some of the earlier systems that others have suggested. Cheap PSUs, like these, are much more likely damage a user's system when they are over stressed and fail, than are quality units. It's not worth having even a few people have their hardware ruined (as we have seen many times on the AMD Athlon 64 board), just trying to save $20-30.
I would also like to see a PSU roundup.
Glassmaster.
Bonesdad - Tuesday, February 1, 2005 - link
"Personally I find most of these cases more aesthetically pleasing then the gaudy and flashy hyped up "gamer" cases typically reviewd by AnandTech. " - from #30Gotta agree here...why does this site continue to review that silly looking crap? There are plenty of professional, excellent cases out there that deserve to be reviewed in a professional way, like AT does. I hope never to see another gaudy, childish PC case on this site again.
Do more case reviews AT, just not "gamer" cases.
flexy - Tuesday, February 1, 2005 - link
http://www.silentpcreview.com/article75-page2.htmlevercase 4252 mentioned and reviewed there, also, they used this case for their "StealthPC" mod.
For everyone on a budget and wanting a GOOD case i seriously recommend looking at this case.
flexy - Tuesday, February 1, 2005 - link
i cant believe that you left out the Evercase 4252 which is only $32 and got excellent reviews at many places. Overclockers.com and everyone raves about this case and it has *excellent* airflow and i saw it even listed on http://www.intel.com/cd/channel/reseller/asmo-na/e...as "thermally advanced".,
The evercase 4252 also has a 120mm fan in the back which provides excellent airflow.
I cannot understand that you gave the award to a case with only a measly 80mm fan...the next case i will get for sure will have a 120mm fan in the back to provide sufficient airflow if needed.
Also...some people's argument: "If you buy a $30 case then you probably put in cr*p compnents"
I just can laugh...i especially laugh at people who buy $300 cases and then a $160 video card and a $100 CPU as main components in their systems :)
The last case i had (an Enlight 7252) did a great job for almost 4 years now...including the PSU which was included...and the case incl. a decent CPU (for the XP1900 i had w/ 9800Pro) was only $52.
My next build will have ALL high-end components (XP850XT PE, A64 3500+, Enermax PSU, OCZ Ram, XP-120)...and since i am saving the money and dont spend on unnecessary "gadgets" i am still reusing my old Enlight case..knowing it might not be optimal.
If i feel like it (maybe in a few months) i might get the Evercase 4252 w. a nice variable 120mm in back, and this case is also only $30 as said before.
I recommend you doing research first before laughing at people who spend $30 or so on a case...its only a freakin' case...but as said also in the budget section there are GOOD ones !
Rand - Tuesday, February 1, 2005 - link
Personally I find most of these cases more aesthetically pleasing then the gaudy and flashy hyped up "gamer" cases typically reviewd by AnandTech.The Raidmax case looks quite nice IMHO, in terms of pure aesthetics it's an excellent design. Asia Pro model isn't bad for someone that wants something a bit more flashy. The Foxconn model looks halfway decent aesthetically.
Even the CodeGen and Powmax cases don't look too bad even though I don't care for them myself.
Linkworld 3210 looks like a fine option for those that want an easily portable case, that looks a bit more showoffish then the RaidMax case.
For the price these cases sell at, as long as they don't have too many sharp edges and the case/PSU holding isn't overly flimsy I'd be perfectly willing to use a few of them.
These cheaper models may not be toolless, but IMHO that's not particularly a big loss.
Using a few screws isn't particularly stressful, given the cost savings.
I'm also not sure I agree with other posters that anyone looking at a budget case should be buying Dell.
Dell's cases aren't typically any more aesthetically pleasing as these are, and at least going DIY even with a budget case you can buy whatever components you wish with no worries of any proprietary hardware, or a motherboard that's pretty much limited to what's already installed.
A handful of these cases seem perfectly acceptable budget offerings that I wouldn't feel at all disadvantaged by using in my own systems.
Maybe not as nice as something like the Antec Sonata, but given the cost savings their quite decent.
My only real complaint about this review is that a few of these cases come stock with a PSU... yet that's not even mentioned let alone tested.
Granted the stock PSU's are likely to be pretty crappy generic models, but if someone wants to build a cheap PC from some older PIII era hardware they have lying around it might be adequate.
It's not altogether impossible for a low end case to come with a half way decent PSU suitable for low to midrange hardware either, while it's rare I have seen budget cases that come stock with some an older 300W Fortron PSU, whose budget PSU's are usually quite decent.
epiv - Tuesday, February 1, 2005 - link
I built many computers for family members and friends. I would never use very cheap stuffs for computers I built. I do not think it is worth my time to built crap.If someone just want a cheap computer. I would just order a Dell for them. I ordered a few Dell systems without OS for less than $300 for people need cheap computers.